Jump to content
RollinLower

(Complete) Toasty, mATX Threadripper!

Recommended Posts

Posted · Original PosterOP

alright, so this is gonna be the start of the buildlog i'm doing to switch my system from it's current config to AMDs Threadripper platform.

 

I'm doing this because my motherboard died sadly. I was in the process of swapping the CPU for a 2690V2 when i put in a little too much force and ended up breaking one of the chokes on the VRMs when my screwdriver slipped. It's the middle one on the picture below.

5ac92b0811f50_IMG_20180407_2231532.thumb.jpg.04779bf321bc5f101937ab74486e34ab.thumb.jpg.e9682d08ee3d632e52a1bea635db83b9.jpg

Luckily Asrock just recently released the X399M Taichi board, which makes this as good of a time as any to make the plunge! Lesson learned i guess, when i get to installing the Threadripper slow and steady is gonna be the way to go :P

Just look at this board tough! If i ever got a tech-boner from something it has got to be this thing. so much stuff crammed on so little space!

5acb4b05596ff_X399MTaichi(L2).png.fd70d2608bee86c004d0fb194f110b80.png

 

First things first, right now my setup looks like this:

IMG_20180409_131725.thumb.jpg.78012e7ccd4c3ff8bad0e848744699ed.jpg

which is really just a heartbreaking thing to see if i'm honest. this rig was made to crunch numbers in [email protected], not sit still disassembled on my desk.

Sadly i won't be able to really get going with this untill later on this month when my paycheck comes. I was not prepared to make the switch this early, so i can only buy the motherboard right now.

 

speaking of which, lets make a to do list. i really only need to swap out the RAM, motherboard and CPU. everything else in the system is ready to go really. I'll also need to swap out the X99 edition CPU block for a TR4 model.

 

PARTS! RED= pending, BLUE= bought, GREEN= arrived and in my hands!

 

Asrock X399M Taichi motherbord

AMD RYZEN Threadripper 1900X

Corsair Dominator Platinum 16GB (2x8) DDR4 3000

EKWB Supremacy Threadripper CPU block

EKWB EK-FC Geforce GTX FE GPU block

XSPC temperature sensor/display

Alphacool temperature sensor in a G1/4 fitting

Noctua NF-F12 Chromax (x3)

 

So i guess that's it for now. Watch this space for updates, which will come as parts start rolling in!

 


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites

Emm, why are you going with a 1900X when it's basically the same thing as the 1800X, just on another platform? Any specific reason you need to be on X399?

Link to post
Share on other sites
Posted · Original PosterOP
1 minute ago, Dreamplay said:

Emm, why are you going with a 1900X when it's basically the same thing as the 1800X, just on another platform? Any specific reason you need to be on X399?

I have a few reasons I'm going with the 1900x

1- I'm short on cash and it's a good entry into x399

2- I can get a good deal from someone on a combo with the chip and RAM

3- the Upgradepath is awesome

4- massive amounts of PCI lanes for my GPU and any SSDs I add in the motherboards three M.2 slots


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites
1 minute ago, RollinLower said:

I have a few reasons I'm going with the 1900x

1- I'm short on cash and it's a good entry into x399

2- I can get a good deal from someone on a combo with the chip and RAM

3- the Upgradepath is awesome

4- massive amounts of PCI lanes for my GPU and any SSDs I add in the motherboards three M.2 slots

Fair enough. You're probably experienced enough to not really need this advice but it can be better to just save up for the better options right now since next time you upgrade may be when a new and more flashy platform has come out. Anyways good luck!

Link to post
Share on other sites
Posted · Original PosterOP
2 minutes ago, Dreamplay said:

Fair enough. You're probably experienced enough to not really need this advice but it can be better to just save up for the better options right now since next time you upgrade may be when a new and more flashy platform has come out. Anyways good luck!

Yeah the sensible thing would be to save up a little and go with the higher end one, tough that would require waiting even longer and I don't think I can muster up the patience for that :P

Thanks!


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites

Meh, disappointed it's not actually in a shoebox. 

 

I am crazy in love with the InWin case though and also consider it for my next build :P

 


Gaming HTPC:

R5 [email protected] - Cryorig C7 - Asus ROG B350-i - Asus GTX 1080 Strix - 16gb G.Skill Ripjaws V 3333mhz - Silverstone SX500-LG - 500gb 960 EVO - Fractal Design Node 202 - Samsung 60KS7090 - Logitech G502 - Thrustmaster T500RS - Noblechairs Icon


Desktop PC:
i7 2600k @stock - H100i GTX - Asus P8Z77-i Deluxe - Asus GTX 1050Ti Strix - 16gb HyperX Fury 1866mhz - EVGA 750G2 - 250gb 840 EVO - 6TB WD My Book Duo (Reds) - Enthoo Evolv ITX - Dell U3415W - Benq XL2411T - Qpad MK-85 Brown - Logitech MX518 - Blue Yeti Platinum - Noblechairs Icon 

 

Audio Gear:

Hifiman HE-400i - Kennerton Magister - Beyerdynamic DT880 250Ohm - AKG K7XX - Fostex TH-X00 - O2 Amp/DAC Combo - 
Klipsch RP280F - Klipsch RP160M - Klipsch RP440C - Yamaha RX-V479

 

Reviews and Stuff:

GTX 780 DCU2 // 8600GTS // Hifiman HE-400i // Kennerton Magister
Folding all the Proteins! // Boincerino

Link to post
Share on other sites
Posted · Original PosterOP
59 minutes ago, FloRolf said:

Meh, disappointed it's not actually in a shoebox. 

 

I am crazy in love with the InWin case though and also consider it for my next build :P

 

Lol yeah the name is in reference to my first self build, which was the size of roughly a shoebox. It has gotten a bit bigger over the years but the name stuck :P

 

The case is amazing indeed. A few quirks when building in this tough:

 

The front airflow is absolutely terrible. Get super high pressure fans for that! Also, my evga PSU is just a bit too long to be installed normally in this case. So I had to disassemble the drive cage to fit it in.

 

Apart from those things building in this case is a breeze!


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites
Posted · Original PosterOP

Right, so here's a small update. 

 

I decided to switch from the planned 4x4 GB low profile ram to 2x8 GB dominate Platinum for a couple of reasons:

1) it looks so much better

2) it was actually cheaper

3) it gives me two open dimm slots to expand to 32GB if I want to.

 

So yeah, they are ordered and on their way. More updates as stuff happens, which should be pretty quickly now as payday has nearly come! :D


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites
Posted · Original PosterOP

updates! I just received the RAM. I gotta be honest, stepping down from 32 to 16 GB is feeling kinda weird, but the jump from DDR3 1866 to DDR4 3000 should make up for it. Plus, I still have 2 DIMM slots free when I install this, so upping the size shouldn't be a problem when I inevitably do it in the future ;)

IMG_20180424_142735.thumb.jpg.d7d7c3cd804282f9c01a64dc059bf4c3.jpg

I also decided on the coolant I'll be using. I ran pastel fluid before, which left lots of grot in the components. After that I ran EK's cryofeul, but even that left some residue. So now I'm just going to run demiwater. 2 bottles for cleaning my loop and components, and 1 bottle for filling the loop.

IMG_20180424_143144.thumb.jpg.9ebe513765e27be5037bae4e35ca16aa.jpg

Tomorrow I'll receive the Threadripper (wooo!) And after that the wait is on the CPU/GPU blocks, and the motherboard. 

I had to order the Mobo from Newegg, since I couldn't buy it anywhere else in my country. (The Netherlands) so I think it might take a while for it to arrive. 

 

So that's about it for now. More as parts come rolling in!


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites
Posted · Original PosterOP

Don't do pastel fluids, kids :o

15245787385534008987842519237496.thumb.jpg.a5b891048863ab61ec6b77b5fd555883.jpg


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites
Posted · Original PosterOP

The mailman came by today, wih tons of good stuff! 

first, i got the EKWB Threadripper CPU block. It looks amazing, and the coldplate is massive. I might switch out the top for my full nickel one from my X99 Supremacy, but i'm not sure yet. The whole build is going to be black/grey, so maybe the nickel block is going to stand out too much?

IMG_20180425_113349.thumb.jpg.fa3d836eaa43b03ba1954c72c7c181a2.jpg

also, i got the actual CPU!

IMG_20180425_114143.thumb.jpg.db0ddbe06872f15ef2109f2494756395.jpg

This thing, oh man it's heavy. it's probably 3 times the physical size of my old CPU, which already was a hefty Xeon.

also, unpacking was a treat. They really got the experience of opening something special right with this one!

IMG_20180425_114057.thumb.jpg.29218b9616668bfac41b73c1ca7dfdfe.jpg

I love the aggressive naming as well. It might be a bit tacky, but you can't deny it sounds pretty cool. ;)

IMG_20180425_113821.thumb.jpg.023b7d630a466281dd2a3ae144f4cd35.jpg

 

So that's it for now. More as the last few parts come rolling in!


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites
Posted · Original PosterOP

Right, so today was a pretty huge day for this build. It is up and running now, but it really isn't complete just yet. That might sound a bit contradictory, but it'll be clear lateron in this post.

 

So first things first, the Motherboard arrived! It was a long journey to my doorstep, but FedEx got it done within 3 days, which is mindblowing to me. It started it's journey in California, and now it's here in The Netherlands. That's a lot of miles to cover in just shy of three days! :o

 

Anyway, this board. Oh boy, this thing is impressive. 3 M.2 slots, 3 X16 PCIe and that massive TR4 socket and 4 DIMM slots somehow packed into the mATX formfactor. They guys that designed this deserve a raise!

IMG_20180426_115113.thumb.jpg.35f1bfd614a6b417447dbfc3507536e7.jpg

Also, DAT SOCKET. so. many. pins!

IMG_20180426_115433.thumb.jpg.a95651361dded5932f9ad477dc90f1b0.jpg

 

anyway, in go the CPU, RAM and the waterblock. i'm already digging the monochrome look. 

 

i originally intended to have the CPU block fittings oriented like the pic below, but quickly found out that the reservoir would interfere with the top one, so i had to lower that one by taking out the extender fitting, and because now the tubes couldn't clear the RAM it had to be routed a little different. all of this also means the 120mm rad needs to be oriented upside-down, but to be honest i don;t mind the look.

IMG_20180426_120530.thumb.jpg.5be02cb3f577e1bca5a08aae47c956de.jpg

 

here i realized the fittings needed to change a bit:

IMG_20180426_134208.thumb.jpg.cec3a99283622f5f6312cdc21177a0ce.jpg

 

sadly after this i forgot to take any more pictures untill it was finished, so here's the finished build for now.

IMG_20180426_195917.thumb.jpg.463a076ff13c7f44dd918c468ce29f1d.jpg

IMG_20180426_195905.thumb.jpg.a10effee457835a99f1d202802cf47fc.jpg

IMG_20180426_195842.thumb.jpg.90a77100faa55eaae7452e2669d8bf8f.jpg

obviously this is not done. the front rad isn't even in the loop yet, just like the GPU, which definitely needs some water!

sadly i won't be getting the GPU block untill next week. so untill then this is how she stands. 

 

as always, more updates as the final parts come rolling in!


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites
Posted · Original PosterOP
Just now, Mnpctech said:

shoe box indeed, well done job

 

 

thanks! i'm hoping to finish the loop soon. i had this Titan under water for so long in my other system i kinda forgot how loud it can get. :/ Nvidia cooler = jet engine.


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites
Posted · Original PosterOP

Alright, here's the final update of this re-buildlog.

i finally got in the last few parts. So that's a GPU block, and also a temp sensor and display readout.

IMG_20180501_095830.thumb.jpg.787acd1f3bfd5389ff99b43460a50a76.jpg

i also got these, since somehow my bottom Vardar fan kept dying on me.

IMG_20180502_161543.thumb.jpg.8a82101324550776857b334c7467c416.jpg

i guess it's because of the close proximity to the GPU. (dispite how it may look, they are actually not touching!) but i'm hoping the Noctua NF-F12 Chromax are a little more durable. it's sad tough, i always liked the look of the Vardars, and imo EKWB should be better than this.

 

anyway, now on to the nice things: is there anything better than a fresh water-cooled GPU? 

i've had it on the stock cooler for a while now, and that thing can get so obnoxiously loud! :P i can't wait to be able to hear myself think again when i'm gaming or doing something load-intensive.

IMG_20180501_112940.thumb.jpg.5159cb78f9ff22d5cef0ef26a8e1afa5.jpg

after a while of getting my hands jammed in the tiny amounts of space i left for myself i finally got the loop together!

IMG_20180502_124435.thumb.jpg.ab1ddf806cce585b461a783dfc6ebeb8.jpg

i like how clean this one looks, but i loved the parallel loop i had in here on my old X79 setup. i dunno tough, if anything, this should have better airflow :P

also, going serial means i have equal flow over my components, and that's always a plus.

IMG_20180502_101532.thumb.jpg.d01a415c4675284df2a4b4b5c2a7b69f.jpg

 

so that's it! buildolog complete.

 

all in all i definitely love the outcome. a clean, monochrome build that isn't too flashy or anything, but definitely gets the job done and enters me onto a great upgradepath. 

i especially like the temp-readout in the 3.5"bay. it's just a gimmick ofcourse, but it should be a nice little quick-check when overclocking or something, since i put it in the hottest part of my loop, right before the water from my GPU enters the 240 rad.

so yeah, thanks for reading, and i'll see you guys when i inevitably want to change something again :P


Threadripper 1900X 4.2Ghz - 16GB Corsair Dominator Platinum 3Ghz - Nvidia Titan X (Pascal) 2.1Ghz - Asrock X399M Taichi - InWin 301 - EVGA Supernova 850 G2 - about 1.5TB of mixed SSDs - Full custom waterloop 

BlackMac buildlog Toasty Buildlog 60% Keyboard Buildlog

Hardware that died by my hands:

- Intel core i7 4960x extreme edition

- Asrock X79 Extreme 4-M

 

Link to post
Share on other sites

damn my dude. that is noice af.


Pc Specadoodles:

AMD A8-5500

Graphics: XFX Radeon HD 7770 Ghost cooler edition

Memeory-Rams: 8GB

HDD: 1 TB Hitachi Mechanical

PheadHones: Logitech G430's

Keybored: Rosewill NEON K51 RGB black

Moose: Steelseries Rival 110

Monitor: 1600x900 21.5 " Gateway monitor.

potential upgrades: non OEM PSU

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Sign in

Already have an account? Sign in here.



  • Recently Browsing 0 members

    No registered users viewing this page.

Last Topics

xbox controller headset jack size how remove a stripped screw how many mega bytes in a gigabyte what ios does ipod touch 3rd generation have how do you remove a screw with a stripped head how to unscrew a small stripped screw connecting xbox 360 controller to xbox gta v xbox 360 gamestop gigabyte fsb 1333 pvp kernel not responding lol turn linksys router into access point


×